Gift Box MOQ & Pricing: How Unit Price Is Calculated
+86-15906266503 [email protected] West Building, No.99 Heji Road, Baihe Town, Qingpu District, Shanghai, China
Packaging guides and articles - Yoofo Packaging
News
Location Home › Blog > Gift Box MOQ and Pricing: How It's Calculated

Gift Box MOQ and Pricing: How It's Calculated

By Jimmy Wang · Founder of Yoofo Packaging (30 years in packaging) Published: 2026-11-10 · Reviewed before publishing · Factory figures verified

QUICK ANSWER

A custom rigid gift box price is made of two parts — a one-time setup cost (structure development, cutting dies, printing plates, press make-ready) and a per-box running cost (board, paper, printing, finishes, insert, hand assembly). The setup cost is divided across the order quantity, so the unit price falls as quantity rises; the minimum order quantity (MOQ) is the point where setup cost per box becomes reasonable. At Shanghai Yoofo Packaging the bulk MOQ is 2,000 pieces per design, and every quote is calculated for the exact specification.

This page explains the formula, the cost drivers that move a quote up or down, and how to compare quotes fairly.

Why do gift box factories have an MOQ?

Because a large part of the cost is the same whether you make a few boxes or many. Before the first sellable box, a factory has to:

  • engineer the structure and make a cutting die for each board and paper part,
  • output printing plates and mix the ink colors,
  • run make-ready sheets until color and registration are right,
  • set up wrapping, forming and gluing for your size.

That work is fixed. At small quantities it dominates the unit price; at higher quantities it almost disappears. An MOQ protects both sides from orders where the setup cost per box is out of proportion to the box itself.

What is Yoofo's MOQ?

  • Bulk MOQ: 2,000 pieces per design.
  • Pilot run: available before bulk, only for bulk orders of 2,000 pieces or more. The pilot fee is credited to the bulk order. A pilot run lets you check real production boxes before the full run; it is not a separate small-order program.

How is the unit price calculated?

A simplified, factory-neutral way to think about it:

Unit price ≈ running cost per box + (setup cost ÷ quantity)

  • Running cost per box = board + wrapping paper + printing + finishes + insert + magnets/ribbons (if any) + assembly labor + inner packing.
  • Setup cost = dies + plates + make-ready + structural development.

Illustrative example (hypothetical numbers, not a quote)

The figures below are invented purely to show the arithmetic. They are not Yoofo prices and not market prices.

Quantity Hypothetical setup cost Setup per box Hypothetical running cost per box Illustrative unit total
2,000 1,000 units of currency 0.50 1.00 1.50
5,000 1,000 0.20 1.00 1.20
10,000 1,000 0.10 1.00 1.10

The pattern is what matters: doubling quantity does not halve the price, because the running cost per box stays roughly the same. Beyond a certain quantity, savings come mainly from material purchasing and longer uninterrupted runs, not from setup.

Is there a real reference price?

One published reference exists on our site: a red double-door cosmetic rigid box at USD 1.09 per piece at 10,000 pcs for that specific size and spec (product page). It is a single data point for a double-door rigid box at that volume. A different size, paper, finish or insert will change the number.

Which specifications change the price most?

Cost driver Why it matters How to keep it under control
Box size More board and paper per box; larger sizes may need larger sheets or more hand work Size the box from the product + insert, not from a mood board
Board thickness Thicker greyboard costs more and is harder to wrap Match thickness to product weight; ask the factory for a recommendation
Wrapping paper Specialty, textured, pearl or imported papers cost more than coated art paper Use specialty paper on the lid only if budget is tight
Printing Spot (Pantone) colors, inside printing and full coverage add plates and ink Combine CMYK with one spot color for the brand color
Finishes Hot foil, cold foil, embossing/debossing, spot UV and soft-touch each add a process step and often a tool Choose one hero finish instead of stacking four
Insert EVA, flocked trays and multi-cavity inserts can be a meaningful share of the box cost Use paperboard inserts where protection allows
Structure Magnetic, double-door, drawer and special shapes add parts and assembly time Lid-and-base is the leanest rigid structure
Quantity Spreads the setup cost Order per design; avoid splitting volume across many low-volume SKUs
Packing and shipping terms Export carton, pallet and the Incoterm change your landed cost Compare quotes on the same Incoterm (Yoofo quotes FOB Shanghai)

Why do two factories quote very different prices for the "same" box?

Usually because the boxes are not actually the same. Check that every quote states:

  1. Inner dimensions and tolerance
  2. Board thickness and paper type/weight
  3. Printing method and number of colors (inside and outside)
  4. Each finish with its area (foil size matters)
  5. Insert material and cavity design
  6. Packing (inner bags, cartons per pallet)
  7. Incoterm (FOB, EXW, DDP) and port
  8. Sample, setup and pilot charges, and whether they are credited later

A quote far below the others often reflects thinner board, a different paper, or costs moved elsewhere (for example into freight).

How can I lower the unit price without making the box look cheaper?

  • Keep one hero finish. A single well-placed foil logo often reads more premium than several competing effects.
  • Use specialty paper strategically — lid outside only, standard paper inside.
  • Standardize sizes across SKUs so they share one structure and die.
  • Consolidate quantity into fewer designs so each stays at or above MOQ.
  • Choose the leanest structure that meets the brief (see our lid-and-base vs magnetic closure guide).
  • Plan the calendar so production is not squeezed into a peak-season window.

FAQ

What is the minimum order quantity for custom rigid gift boxes at Yoofo?

2,000 pieces per design for bulk production. A pilot run is available before bulk for buyers placing a bulk order of 2,000+ pieces, and the pilot fee is credited to that bulk order.

Why can't you give me a price without full specs?

Because size, board thickness, paper, printing, finishes, insert and quantity each change the cost. A price without them would be a guess. Send the spec and we quote per specification.

Does a higher quantity always mean a lower unit price?

Generally yes, because the fixed setup cost is spread over more boxes. The savings shrink at higher volumes because materials and assembly are paid per box.

Are samples and setup costs included in the unit price?

It depends on the quote; ask for them to be listed separately. At Yoofo, sample, setup and any pilot charges are stated in the quotation, and the pilot fee is credited to the bulk order.

Is there a published reference price?

Yes, one: the red double-door cosmetic rigid box listed at USD 1.09/pc at 10,000 pcs for that specific size and spec. Other designs are quoted individually.

What Incoterm are Yoofo prices based on?

FOB Shanghai. The buyer's forwarder handles main freight, insurance and import duties from the port of Shanghai onward.

Related guides and pages

About Yoofo Shanghai Yoofo Packaging Products Co., Ltd. (上海友孚包装制品有限公司) is a rigid gift box factory in Baihe Town, Qingpu District, Shanghai. Registered in 2010; founder with 30 years in packaging. ~5,000 m² factory, 100+ staff, capacity up to 40,000 rigid boxes per day at peak. Bulk MOQ 2,000 pcs (pilot run available for 2,000+ bulk orders, fee credited); production sample in 5 days; bulk about 20 days; FOB Shanghai. Certifications: ISO 9001. Contact: Jimmy Wang · [email protected] · WhatsApp +86-15906266503 · No.99 Heji Road, Baihe Town, Qingpu District, Shanghai.


— Jimmy Wang, Founder, Yoofo Packaging (Shanghai Yoofo Packaging Products Co., Ltd.; 30 years in packaging)
Published: 2026-11-10

“A box is judged in three seconds — by its weight, the sharpness of its edges, and the way the foil catches the light. Everything else is decoration.”

— Jimmy Wang,Founder, Shanghai Yoofo Packaging

Turn knowledge into packaging — get a factory quote in 5 steps.

Add Yoofo Packaging as a preferred source on Google

Get the Packaging Buying Guide

One practical packaging tip per month. No spam, unsubscribe anytime.

Need Custom Gift Boxes? Get a Quote in 5 Seconds

Yoofo Packaging: own factory in Shanghai, up to 40,000 boxes per day at peak, bulk ~20 days FOB Shanghai. Bulk from 2,000 pcs.

See all custom packaging FAQs — MOQ, sampling, lead time, shipping and payment →

ISO9001:2015 certified · FSC-CoC certified (AEN-COC-001112)  ·  Founder: 30 years in packaging · Up to 40,000 boxes per day at peak

B2B Business Directory